Tap the workspace to place the selected part. Escape cancels.
Instructions
Getting started
- Name the track in the top bar. Set the carpet size in Settings before drawing; use File → Clear to start with an empty layout.
- Open Parts and choose a category: Curbs includes individual pieces and ready-made corners, Barriers includes trunking and fittings, Other contains markers, Text, Loop, jumps and cars, and Custom holds your saved components.
- Tap a part, then tap the workspace to place it, or drag it from the tray. Press Esc to cancel tap placement. When panels sit at the bottom, drag their top grip up or down to resize them.
- Select a part and open Properties to change its supported colours, length or angle. Enter a rotation amount and use the clockwise or counterclockwise button to turn it.
- To change the carpet colour, clear the selection, click the carpet, then open Properties. Select a curb or curb chain to change its dark and light colours. Curb dimensions follow Slideology kerbs.
- Use Pan, hold Space and drag, or drag with the middle mouse button to move the view. Hold Alt and use the wheel to zoom. On touchscreens, use two fingers to pan and zoom.
Selecting and editing
- Click a chain or group to select it, click a part again to edit that member, then click the selected member again to return to the whole assembly. Click empty workspace to deselect. Green controls mark a single part; blue controls mark an assembly. Round handles rotate; square handles move or reshape.
- Drag across empty workspace with a mouse to select several parts, or Shift-click to add or remove parts. On touchscreens, turn on Select multiple and tap the parts you want.
- Hold Shift while dragging to lock horizontal or vertical movement. When moving a barrier end or a fitting directly attached to it, Shift locks movement along the barrier instead.
- Properties provides Group, Ungroup, Duplicate and Delete actions. Group repeated features for reuse. You can still select and edit individual members, including Text and measurements, inside a group.
- Choose Measure and tap twice in the workspace, or hold Ctrl/Cmd and click twice to add a measurement. Hold Shift while measuring to snap to 45 degrees, or press Esc to cancel.
- Choose Racing line and tap points along the middle of the circuit. Place at least three points, then tap the first point or choose Finish loop in Properties. Undo removes the last point while drawing; Escape cancels. Drag the finished loop's square points to refine the curve and see its approximate lap length update. Use Add point then tap the curve, or select a point and choose Remove. Turn on Racing line lengths in Settings to show total lap length at the first point and cumulative distance from the start at every later point. The curve moves with grouped parts; Settings can hide it without deleting it.
- Type measurement and barrier lengths in Properties using the displayed units. Measurements round to 50 mm steps; barrier lengths keep the entered value.
- Double-click Text to edit it on the layout, or edit its contents in Properties. Box width, height and grips add space around the text without changing font size. Add a solid or dashed border in Properties. Loop starts as white text with a dashed red border. Adding Text or Loop shows hidden text labels.
Connected barriers and fittings
- Offer compatible open endpoints to snap parts together. Joined parts form an assembly that moves and rotates together. Use connectors between trunking sections; barriers do not snap directly to other barriers.
- Select a member to resize or rotate a connected barrier with its end handles, or move an attached fitting to adjust that barrier end. You can edit connected barriers and flexible connectors without detaching them.
- Double-click near a connected end to detach that joint. Detach in Properties disconnects all joints of the selected member. Once a barrier is disconnected, double-click where you want to split it, leaving at least 100 mm at each end. Split barrier in Properties cuts it into two halves.
- A flexible connector includes both fittings and the flexible barrier. Moving a connected end carries the opposite end with it; moving a free end keeps the opposite end still. Hold Alt while dragging an endpoint or an individually selected fitting to reverse that behaviour. The flexible barrier grows when needed and returns toward its starting length as you drag back.
- The flexible connector's middle handle changes strip length. Its round end grips turn the fittings independently; their angles are also in Properties. Set a hinge's bend in Properties, where 0 degrees is straight. Adjusting a barrier attached to a hinge changes the hinge angle.
- Only the adjustable face of an angled end cap aligns against a barrier's side. This side contact does not add a socket connection.
- The adjustable flapper has one fitting and a teardrop-shaped flexible barrier. Its single handle changes the flexible length while the socket stays fixed.
Library, saving and shortcuts
- Use Parts → Custom → Store selection to save a single part, assembly, group or multi-selection. Drag library grips to reorder, or focus a grip and press Up or Down. Library actions contains download, upload, clear and restore-default options.
- Save stores the layout in your account when signed in, or in this browser otherwise. File contains saved tracks, JSON backups and Export PNG. Download JSON for an editable backup.
- For printed build instructions, choose Export area and drag a box around a corner, or use File → Export PNG for the visible view or whole carpet. Drawn areas fit as large as possible on the A4 page. Preview portrait or landscape with a compact parts list beside, below or over a corner of the drawing. Count parts in the exported area, the whole layout or your current selection; choose categories and drawing details, or omit the list. Barriers and their length totals start off; connectors have a separate filter. Selection is optional. Parts touching the edge count as whole pieces. Download the PNG and print on A4 using Fit to page.
- Settings has separate controls for curb angles, connector angles, barrier lengths, racing line lengths, text and dimensions. Use Labels in Properties to show or hide labels for a selection, or return to its display setting. Settings also controls units, grids and carpet joins. Inventory lists the parts used in the layout; expand the selected-parts count in Properties to see its parts list, including members of groups and chains. Fullscreen expands the whole workspace, including panels and dialogs.
- File → Share track publishes a snapshot after the publishing checks pass. Private edits stay private until you share again. Browse tracks opens community layouts; My tracks opens your saved layouts when signed in.
- Use S for Select, P for Pan, M for Measure and L for Racing line. Click the active tool again, or repeat its shortcut, to return to Select. Switching away from Racing line cancels an unfinished loop; close it at its start or use Finish loop to keep it. Ctrl/Cmd+A selects all visible objects. Numbered tray shortcuts 1 to 0 place parts; Shift+1/2/3 places a jump, box or car. Choose Custom components from the tray; Ctrl/Cmd-number remains available for browser tabs.
- Ctrl/Cmd+G groups; Ctrl/Cmd+Shift+G ungroups; Ctrl/Cmd+D or Alt-drag duplicates. Use Ctrl/Cmd+C/V to copy/paste and Delete or Backspace to remove parts.
- Ctrl/Cmd+Z undoes; Ctrl/Cmd+Shift+Z redoes. Arrow keys nudge 10 mm; Shift+arrows nudge 100 mm. R rotates clockwise and Shift+R anticlockwise by the amount in Properties. H/V flips; I inverts curb colours. Ctrl/Cmd+S saves, F fits the carpet and +/- zooms. JSON and PNG exports are in File.
About
I built RC Layout Lab because planning an indoor on-road track should feel as practical as building one. Generic drawing tools can work, but they make you calculate scale, improvise curb shapes, and guess whether the design can be built cleanly on the day.
This editor is purpose-built around the way RC clubs actually prepare carpet tracks: snap-together curbs based on Slideology kerbing dimensions, reusable corner sections, measurements, carpet grids, inventory counts, and printer-friendly exports for build notes and pre-assembled corners.
The goal is to move more of the thinking into the planning stage, before volunteers are kneeling on the carpet. A clearer layout, better part counts, and useful reference drawings should help the team build faster, race sooner, and spend less of the meeting repairing barriers.
FAQ
RC track editor questions
Answers for clubs and racers using RC Layout Lab to plan, share, and adapt indoor carpet track layouts.